0
0
Want to get an easy fix for your shower screen Melbourne?
Maybe you just need to make a few small adjustments that will make all of the difference in your showering experience. Well, there is a solution available that will allow you to do just this and more. Here is what you can do.
Want to know a quick and simple way to get a new shower screen Melbourne replacement? It’s as easy as walking into your local Home Depot or Lowes outlet store and buying a replacement panel. These panels are usually about two hundred dollars each, depending on which company you buy them from. So, that’s not very expensive at all, is it?
But, you might want to consider another option, instead. Why not try installing your own semi-frameless shower screen, instead? There are many different ways that you can do this, but we will focus on one of the simplest, and easiest fixes that you can make.
First, you need to prepare your shower screen. If you have a tile shower screen Melbourne, then you don’t even need to worry about this step. However, if you have a glass shower screen, then you will have to clean it to make it ready for the installation process. This includes removing any soap residue and removing any grout lines. If you want an easy fix for your shower screen, then you should also clean the screen itself to remove any mould or mildew.
Next, you will want to purchase a few items to help make your semi-frameless shower screen Melbourne replacement installation process go smoothly. You will need pliers, a screwdriver, a measuring tape, a pencil, some paper, sealer, masking tape, some caulking, and finally, a screen frame. Once you have gathered these items, all you have to do is plug in your measurements and then turn the power to your handy electric razor, so that you can start shaving the old plumber’s putty away. Keep in mind that you may want to work in small areas at a time.
Once the caulking has been applied, use the pencil to mark your areas. Then, using the masking tape, outline the areas where you want to install new screens. Finally, use the paper and your pencil to carefully line up the areas with the new ones. Once you have lined everything up, simply take your electric razor and cut away the old putty.
